CoilOver Kit for 240z, 260z, and 280z ground control

CoilOver Kit for 240z, 260z, and 280z ground control

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Be the first to review this product

Availability: In stock

$498.00

Quick Overview

Coil Over Kit for 240z, 260z, and 280z

Maximum number of characters: 500

Maximum number of characters: 500

* Required Fields

$498.00

Details

These coil over kits are made by Ground Control. They have made a truly exceptional kit. It has been around for quite awhile and has proven itself in the high performance suspension aspect for our Z cars. This coil over kit will work for any type of driving. Whether you want to drive on the track or the street, this kit will work for both.

When you buy this kit you get to pick your own spring rates. This means that you can pick how stiff you want to make your car. This kit comes with Eibach springs. Eibach is a world renowned spring manufacturer with the best reputation for producing very high quality springs. There springs are known for there resistance to sagging and loosing there spring rates. Eibach guarantees ALL there springs for ONE MILLION MILES of normal use. They will replace any spring with any defects.

With this coil over kit you will be able to adjust your cars ride height by up to 2.5 inches. Adjusting the ride high can be done in a few minuets, and is very easy. All you need to do is lift the corner you want to adjust, loosen the spring perch with an Allen key and turn the perch clockwise or counter clockwise, depending on whether you want to make your car higher or lower.

Note: this kit does require removal of stock spring perches and the use of a welder to install the new spring perches. If you don't want to cut off your old spring perch you can use your original spring perch. Downside to this method is you don't get 2 inches of extra backspace for wider tires, and you don't get to pick where you want to weld in your new spring perch.

When you buy this kit be sure to write what spring rates and legnths you want in the comments section. If you'r not sure just send me an email and we can tallk about it.

Note: price is for all four corners. We can not sell half the kit. 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Encino, CA
(818) 636-2797
Edan@silverminemotors.com