Tension Control Rod for 240z 260z 280z TC rod

Tension Control Rod for 240z 260z 280z TC rod

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Be the first to review this product

Availability: In stock

$208.00
OR

Quick Overview

Tension Control Rod for 240z 260z 280z TC rod

Details

All steel construction except The Custom CNC bushing spacers and Brackets.
These TC Rods allow for full on car adjustment of caster.
22.5MM diameter center rods come Zink plated. 17MM diameter threads Can take High amounts of pressure while staying rigid.
Teflon lined rod ends will keep noise to a minimum.
Right and left hand threads to make on car adjustments easy.
CNC bushing spacers made for the S30 allows easy bolt on installation.
Designed to be able to withstand hard use by road, rally, and even drift cars.
These Tc rods give give the driver great handling feeling and response. Zero caster change under high pressure, and full adjustablity of caster.
They will greatly improve handling on all S30 z cars especially if lowered.

Can be adjusted 1/2 inch shorter than stock, or 1/2 inch longer than stock TC rods. 

 

Based on our testing here are some suggested settings.

Track/Autocross

 

For 225 to 245 width radial DOT tires try these alignment settings:

Front

 

Camber: 3 to 3.25 neg

Caster: 6 to 7 positive (even on both sides)

Toe: 1/8" to 3/16" out

Ride height: 5 1/2" to 6" measured at the front of the rocker outboard of the pinch weld seam.

 

Rear

 

Camber: 2.5 to 3 neg

Toe: 1/16" to 1/8" in

Ride height: 5 3/4" to 6 1/4" measured at the front of the rocker outboard of the pinch weld seam.

 

For tire widths over 245 try these alignment settings:

 

Front

 

Camber: 2.75 to 3 neg

Caster: 6 to 7 positive (even on both sides)

Toe: 1/16" to 1/8"" out

Ride height: 6" to 6 1/2" measured at the front of the rocker outboard of the pinch weld seam.

 

Rear

 

Camber: 2.25 to 2.5 neg

Toe: 1/16" to 1/8" in

Ride height: 6 1/4" to 6 3/4" measured at the front of the rocker outboard of the pinch weld seam.

 

Street

 

For 225 to 245 width radial DOT tires try these alignment settings:

 

Front

 

Camber: 1.25 to 1.5 neg

Caster: 4 to 5 positive (even on both sides)

Toe: 1/16" out or 0

Ride height: 6" to 6 1/2" measured at the front of the rocker outboard of the pinch weld seam.

 

Rear

 

Camber: 1.25 to 1.5 neg

Toe: 1/16" to 1/8" in

Ride height: 6 1/2" to 7" measured at the front of the rocker outboard of the pinch weld seam.

 

For tire widths over 245 try these alignment settings:

 

Front

 

Camber: 1.25 to 1.5 neg

Caster: 4 to 5 positive (even on both sides)

Toe: 1/16" out or 0

Ride height: 6 1/2" to 7" measured at the front of the rocker outboard of the pinch weld seam.

 

Rear

 

Camber: 1.25 to 1.5 neg

Toe: 1/16" to 1/8" in

Ride height: 7" to 7 1/2" measured at the front of the rocker outboard of the pinch weld seam.

 

Caveat Emptor: These are starting points for you and your car. Be ready and willing to change them based on your preferences and local conditions. These alignment settings might be a bit tricky in the rain and even trickier in snow or ice. Your tires will wear a bit faster then the stock alignment settings.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Encino, CA
(818) 636-2797
Edan@silverminemotors.com