Wilwood Front Brake upgrade Kit Datsun Truck 64-77 521 320 620 superlight caliper

 Wilwood Front Brake upgrade Kit Datsun Truck 64-77 521 320 620 superlight caliper

Double click on above image to view full picture

Zoom Out
Zoom In

Be the first to review this product

Availability: In stock


Quick Overview

Wilwood Front Brake upgrade Kit Datsun Truck 64-77 521 320 620

* Required Fields



Wilwood front brake kit for Datsun Truck 64-77 521 320 620
Our most powerful front brake upgrade
This brake kit includes:
1. Enormous Aluminum 4 piston calipers (43.75mm pistons)
2. 12 inch CNC dimpled, slotted, vented, Zink plated, and machine balanced rotors
3. DOT approved custom fabricated steel braided brake lines
4. Custom fabricated T6061 aluminum brackets
5. Wilwood brake pads
6. All needed hardware
This is a complete kit. There are no other parts needed to complete the installation. Installing is very easy, and can be done in less than two hours. The lightweight Aluminum 4 piston calipers weight only 3.4 pounds and have 41mm diameter pistons. These calipers are available in many local auto parts stores, so replacing them is not a problem (part number Wilwood 6816). The vented slotted and Dimpled rotors are professionally built with CNC machines, and zinc plated to prevent rusting. They can be bought at any local auto part store. The steel braided brake lines are custom made to fit this brake kit for easy installation. The Aluminum caliper brackets are made of the highest grade of aircraft quality aluminum on the market T6061. These brackets are very light and extremely strong. They will never rust or corrode. You have the choice of getting performance street brake pads or race only pads. I personally have this brake kit on my 620 and it made a big difference, my car now stops on the dime. This brake upgrade is also extremely lightweight; it will help reduce the amount of unstrung weight. This is important since it will allow your suspension to react to road conditions much faster than with heavy cast iron calipers. Your car will handle better and be more predictable. Over all it’s a great brake kit that will make your Z stop faster and better than you could ever imagine!

Note: Requires 16 inch wheels Minimum. 16 inch steel sunraisers were tested by a customer and did not fit without wheel spacer. Diameter of 16 inch is fine. The shape of the face of the wheel will be the deciding factor if it will rub the caliper or not. Any 16 will work with a 1 inch wheel spacer. Or get a 17 inch wheel and have no spacer. 2006 Nissan Titan stock oem wheels will fit without spacer. You will have to machine down the hub diameter 1MM so you can slip the rotor over hubs.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Encino, CA
(818) 636-2797